Data sheet HP15(T) Circuit diagram Transformer Low impedance Secondary nominal tappings 70/100 Volt combined transformer Primary connections White:green White.red 70 V 100 V C:1 C:2 C:3 C:4 15 W 7.5 W 4W 2W Sound pressure levels at 1W/1m P5/15T Specifications Material / colour Mounting Termination Weight w/ transformer IP-rating Max. / min. amb. temp Rated / max. power SPL 1W/1m SPL rated power Effective freq. range Dispersion (-6dB) 1kHz / 4kHz Directivity factor, Q Options ASA / RAL 7035 Bracket Screw connections 1.4 kg 66 / 67 90 °C / -50 °C 15 W / 20 W 108 dB 118 dB 330 - 8000 Hz 130° / 35° 8.3 Impedances, colors, labels Installation, Operation and Maintenance Procedures Fasten loudspeaker to wall/ceiling with two screws through foot bracket. Remove lid by 1 screw, lead cable trough cable gland, select required tapping and connect to terminal 70V or 100V. Fasten lid with a torque of 1.2 - 1.5 Nm. To change the position of the loudspeaker, please adjust the bracket (by loosening / tightening the screws) as required. For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. Do not open loudspeaker when energized. This loudspeaker is supplied with a 2 year warranty against defective workmanship. Head office Semco Maritime A/S, Denmark Tel. no.: +45 7916 6666 Fax no.: +45 7515 6580 semco@semcomaritime.com www.semcomaritime.com Although every reasonable effort is made to present current and accurate information, Semco Maritime A/S makes no guarantee and reserves the right to make changes without prior notice. © 2015, SEMCO MARITIME A/S and the SEMCO MARITIME Group of Companies. Document No. Rev. 00 Page 2 of 2 STD-SEMCO-E-DS-0003
Download PDF file
Build your own flipbook
FOLLOW US :