Data sheet CP-66(T) Circuit diagram 70/100 volt combined transformer Primary connections White:green White:red 70 V 100 V Secondary nominal tappings C:1 C:2 C:3 C:4 6.0 W 3.0 W 1.5 W 0.5 W Sound pressure levels at 1W/1m Specifications Material / colour Mounting Termination Weight w/ transformer IP-rating Max. / min. amb. temp Rated / max. power SPL 1W/1m SPL rated power Effective freq. range Dispersion (-6dB) 1kHz / 4kHz Directivity factor, Q(2kHz) Options ABS / RAL 9010 4 screws Internal screw terminals 0.77 kg 90 °C / -20 °C 6 W / 10 W 86 dB 94 dB 170 - 20000 Hz 180° / 120° Impedance, colors, labels Installation, Operation and Maintenance Procedures To open the loudspeaker, press the two clips on each side of the loudspeaker and separate the cabinet from the chassis. Enter the cable through a suitable cable entrance and connect to terminal. Fasten the chassis to the wall or roof with 4 screws. Clip the cabinet on to the chassis after termination. For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. Do not open the loudspeaker when energized. This loudspeaker is supplied with a 2 year warranty against defective workmanship. Head office Semco Maritime A/S, Denmark Tel. no.: +45 7916 6666 Fax no.: +45 7515 6580 semco@semcomaritime.com www.semcomaritime.com Although every reasonable effort is made to present current and accurate information, Semco Maritime A/S makes no guarantee and reserves the right to make changes without prior notice. © 2015, SEMCO MARITIME A/S and the SEMCO MARITIME Group of Companies. Document No. Rev. 00 Page 2 of 2 STD-SEMCO-E-DS-0007
Download PDF file
Build your own flipbook
FOLLOW US :