Data sheet DSP-15EExmN(T) Circuitdiagram Transformer Low impedance Primary nominaltappings 1:2 2:3 3:4 1:3 2:4 1:4 25 W 15 W 6.5 W 5W 2.5 W 1.5 W Sound pressure levels at 1W/1m Specifications Material / colour Mounting Termination Weight w/ transformer IP-rating Max. / min. amb. temp Rated / max. power SPL 1W/1m SPL rated power Effective freq. range Dispersion (-6dB) 1kHz / 4kHz Directivity factor, Q 1kHz Options IIB IIC Anti-static PA / black Bracket e-chamber, push terminals 2.2 kg 66 / 67 50 °C / -50 °C 25 W / 30 W 105 dB 102 dB 118 dB 115 dB 380 - 7000 Hz 450-6000 200° / 47° 105° / 35° 1.8 Impedances, labels Installation, Operation and Maintenance Procedures Remove lid by four screws, lead cable through the cable gland and connect to terminal with required tapping. Screw lid back into place by four screws with a torque of 2Nm to assure the IP rating. To change the position of the loudspeaker, please adjust the standard U-bracket (by loosening / tightening the screws) as required. Useonlycertified/specifiedcableglandsandblankingplugsreflectingthesameIPratingandtemperaturerange as the loudspeaker. Standard model delivered with two M20 Ex approved plastic blinding plugs. DSP-15EExmN(T) can be supplied with three different bracket systems, according to customer requirements. For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. Do not open loudspeaker when energized. This loudspeaker is supplied with a two years warranty against defective workmanship. Head office Semco Maritime A/S, Denmark Tel. no.: +45 7916 6666 Fax no.: +45 7515 6580 semco@semcomaritime.com www.semcomaritime.com Although every reasonable effort is made to present current and accurate information, Semco Maritime A/S makes no guarantee and reserves the right to make changes without prior notice. © 2015, SEMCO MARITIME A/S and the SEMCO MARITIME Group of Companies. Document No. Rev. 00 Page 2 of 2 STD-SEMCO-E-DS-0006
Download PDF file
Build your own flipbook
FOLLOW US :